Scuba clinic tools. Available in blue only.

Scuba clinic tools. This kit contains the essential speciality tools to perform service works on basic Scubapro first and second stage entry level regulators (MK2, MK2+, MK2 EVO, R095, R195) and BCD's fitted with the BPI. The wrench has both open and close-ended sides that are suitable for heat exchangers of the Apeks XL4 second stages. The removable T-handle makes the tool more compact for storage. The body of the gauge is made from stainless steel 316 with dual range of 0-350 PSI (increments of 5 PSI) and This aluminium pit reference gauge will assist the visual inspector in accurately assessing the depth of external or internal pits found on a cylinder. Made of acetal and fitted with stainless steel pins. We recommend to use: the open ended side to hold the nuts/heat exchangers Special Tools for Poseidon® Regulators Specialised tools for Poseidon regulators. It features 11 selectable units of common measures - including inches of water -. 2 mm) available for use with this modular version of face spanner. This tool is made exclusively for the Apeks Flight and Apeks XL4 second stage regulators. This kit contains: SCT-1104 Starter speciality tools kit for Apek This aluminium pit reference gauge will assist the visual inspector in accurately assessing the depth of external or internal pits found on a cylinder. Based on our vast experience in the field we have come up with a selection of hand-picked quality tools commonly used in scuba repair and service works. Special Tools for Scubapro® Regulators Specialized tools for Scubapro regulators. Disclaimer: Scuba equipment servicing is ONLY to be performed by certified technicians. The Company says that these are in high strength steel and have been tested to the 30Nm limit I asked for in torquing a diaphragm clamp. This tool serves the following 2 functions: To remove the venturi lever from the casing by placing the stepped side of the tool onto second stage casing with the recess placed over the venturi lever and pressing down on the opposi The kit contains the following 6 tools : SCT-0523 3/16" Allen key, Extra Long SCT-0780 Plug Tool for Scubapro Second Stages SCT-1787 Inflator Stem O-Ring Installation Bullet for Scubapro Air2 3rd - 4th The size of this thin spanner is 28 mm. This balanced inline adjustment tool or dual inline adjustment tool will fit most second stages on the market including those with deeply-seated orifices (eg. The correct tools for the job will make the overhaul more efficient and reduce the risk of damage to the regulator. Inflator and parts are not included. 250. Specialised tools for Atomic Aquatic regulators. 30 USD Save $26. 8 mm, 3. 5 cm long with a knurled handle and a 20 mm mirror mount. 755. We have also included some more specialized tools to facilitate your job. 1". SHIPPING TO UNITED STATES: Under the new tariff regime, 800 USD De Minimis exemption WILL still be in place. Shop for instrumentation, tool kits, specialised tools and more from Scuba Clinic Tools. accept no liability for any loss, damage or injury however caused resulting from information contained in these notes. Feb 27, 2023 · I just received three new pins for my Scuba Clinic Tools hook spanners, after bending that one 3. This 1 1/2" crowfoot spanner enables the technician to properly remove, install and torque cylinder valves. 00 USD A collection of tools used for scuba cylinders and valves. Make up your own save-a-dive kit with this selection of products that will make a great additions to your save-a-dive kit. They will get you going fast with a minimum amount of fuss. One side is used on the old version and the other side works with the new version by gripping into the purge button. Hose or parts are not included. It has a 3/8" drive. We recommend to use: the open ended side to hold the nuts/heat exchangers in place The Schrader valve stem tool is used to easily remove and install the Schrader valve stem inside the BCD inflator hose. No more excuses not to use 2 spanners when putting the hose on and off the second stage! The size of this thin spanner is 13/16". Fits a variety of brands like: Apeks, Mares, Sherwood and Aqualung. This analogue differential pressure gauge is used to measure the cracking or inhalation effort of all second stages. Please note the picture is for demonstration purpose only and do not reflect actual product. There are 6 different pin sizes (1. Scubapro R190 This kit contains the essential service tools required to perform service works on regulators and BCD's of any brand. . The range of the instrument is -5-0-5 inches of water with the division of 0. This stainless steel inspection mirror is approximately 16. This face spanner or compass wrench is a must-have for scuba technicians. Quick Links Search About Us Get In Touch Send Mail Newsletter © 2025 Scuba Clinic Tools Powered by Shopify Genuine service kits. Dis-assembly, re-assembly or set-up of regulators often requires specialized tools to complete the job efficient. The selection is hand-picked and includes generic and special tools. Apeks original spare parts. Available in blue only. 3mm pin. The small threaded side fits the inlet fitting of Aqualung Airsource 3 while the opposite end attached to the in-line adjuster. It is the responsibility of the reader to verify the correct information, practises and procedures prior to commencing work. Welcome to the Scuba Clinic Tools shop, your one-stop online store for scuba service tools. 339" - black 36 mm - 1. The in-line-adjuster can now be used to adjust the orifice position in accordance to the manufacturer's The function of this tool is to separate the valve body of the Apeks low profile swivel inflator valve. 106) versions of the part, the wrench also features This BCD Power Inflator Tool is useful for the removal and installation of the internal assembly and inflator button. The author, Scuba Clinic Co. Please note that the picture is for demonstration purpose only and do not reflect actual product. Inflator or p This digital pit gauge will assist visual cylinder inspector in accurately accessing the depth of defects found on a cylinder (isolated pits, corrosion, cuts, dings, gauges) The sharp needle tip allows access to even the smallest pit found. A collection of tools used for BCDs. Length 4” (105 mm). 2 enabling accurate reading of the cracking effort making it extremely suitable for regulator flow testing. Position the bushing assembly in the correct order on the thin shaft of the tool (side with smallest diameter) and insert the tool with the assembly into the first stage body. This dip tube wrench is for installing or removing the older-style dip tubes with no slot or hex. The plate features 10 different depths ranging from . 9 mm, and 4. 496" - blue 40 mm - 1. It provides an easy method for second stage set-up and adjustment. The adapter is made from brass with chromed finish. This kit contains: SCT-1102 Starter sp This analogue differential pressure gauge is used to measure the cracking or inhalation effort of all second stages. The tool is ideal for the inspection of the cylinder neck threads of M25 and 3/4" 14 NPSM cylinders. 263. The face of the ga This kit contains the essential hand tool that are required to perform service works on regulators and BCD's of any brand. 90 USD Genuine service kits. The mat provides a flat non-slip surface for the equipment being serviced and prevent the parts from being scratched. 01" to . This is handy especially when you already have a Seaquest Airsource/Powerline Tool. Made from Aluminium with vibratory tumbled A collection of o-rings and o-ring kits Apeks original spare parts. Additional features include Data Hold and Auto Power Off. 5 mm and 8 mm. Valve parts are not included. The wrench also fits the diaphragm retainer (part# 10714110) of Scubapro MK17 Evo. It is a general hand tool that will find lots of uses in scuba service work. This kit contains: QTY Part # Item 1 SCT This flow bench has been designed to be used in combination with our Adjustable Bench Air Supply and our Analogue Advanced Set-Up Kit (-5-0-5 differential pressure gauge option) or Digital Advanced Set-Up Kit (-5-0-5 differential pressure gauge option). Features: Larger-LCD display for easy r A collection of allen keys. The tool is also suitable to install the o-ring inside This kit contains the essential speciality tools to perform service works on Atomic Aquatics first and second stages. This adapter allows the technician to easily adjust the orifice of Oceanic second stages equipped with a swivel hose - such as on the Oceanic Delta 4 second stage - using the SCT-0808 Balanced In-Line Adjustment Tool. 6 mm Hex Socket 3/8" Drive, Long 100 mm This heavy-duty first stage holder is made from stainless steel 304, incorporating both LP (3/8 UNF) and HP (7/16 UNF) threads at each end. Never miss a dive again! Welcome to the Scuba Clinic Tools shop, your one-stop online store for scuba service tools. Its use is recommended for removal and installation of the yoke nut as opposed to using an adjustable spanner to avoid slipping and damagin The mat provides a flat non-slip surface for the equipment being serviced and prevent the parts from being scratched. This dual side cover tool will assist the removal and installation of the second stages covers of all Apeks XTX series. This kit contains the essential speciality tools to perform service works on basic Aqualung first and second stage entry level regulators (CALYPSO) and BCD's fitted with the Powerline inflator. The pair of pins are N Our collection of modular c-spanners come in a range of 5 different colour coded diameter sizes including: 34 mm - 1. The face of the ga This yoke nut tool allows the easy removal and installation of yoke nuts (19mm, 26mm and 1"). Comes in a blow-molded plastic case, user's instruction manual as well as a calibration certificate. 575" - purple 42 mm - 1. For detailed description of the individual items refer to the individual product pages. The tool can be used in conjunction with a 3/8" driv This thin-walled stainless steel 6-point socket is designed to fit the yoke nut of all various first stage regulators such as Oceanic, Hollis, Aeris, Dive Rite, just to name a few. Designed with durability and functionality in mind, this tool kit ensures the safety and efficiency of any dive outing. This model can be used in conjunction with the hose protector installation to This gauge measures Gauge/Differential Pressure from –55 H2O to 55 H2O with 0. Item will be shipped within 3 working days. It is also compatible with our range of in-line adaptors: SCT-0814 In-line Adjuster Adaptor for Scubapro Air2 and Atomic SS1 SCT-0820 As an alternative to our 4-in-1 Powerline Inflator Tool, this heavy duty version valve core tool serves the essential function of installing and removing the valve core of Powerline Inflator. 417" - silver 38 mm - 1. Made from brass, the tool is handy for installing LP and HP O-rings onto hoses or port plugs by simply capping the tool on top of the equipment and sliding the o-ring on. The tool can be used in conjunction with a 3/8" driv This dip tube wrench is for installing or removing the older-style dip tubes with no slot or hex. , Ltd. Length overall is 302 mm. 00 USD This intermediate pressure gauge is ideal for the professional technician or set-up and will live up to the requirements of higher precision. This i Aqualung original spare parts. The instruments featured are accurate and can be used both on the bench as by a travelling technician. $234. The dimensions are 37 x 54 cm with 5 mm thickness. This kit contains: QTY Part # Item 1 SCT-0133 Torque Wrench 5-60 Nm 1 SCT-0204 Side Cutters, blue 1 SCT-040 This tool is used to properly install the piston busing assembly into the first stage body of the 1st stage of the Scubapro MK25 and MK25 EVO. 120) and the metal (part # 11. Our range include quality standard hand tools, specialized hand tools and c Special Tools for Oceanic® Regulators Specialised tools for Oceanic regulators. The body is made from stainless steel with pins to fit a variety of K power inflators such as Apeks,Hollis and Oxycheq. It can be used stand alone or lying flat and could be wall mounted. A must-have for all technicians! Regulator and parts are not included. 7 mm, 2. The SCT-0901 Scuba Dive Tool Kit, a steel clinic for underwater repairs, is a must-have accessory for every serious scuba diver. Please note that the picture is for demonstration purpose only and do not reflect the actual product. Machined from Acetal and brass. To make a choice from our extensive range of scuba service tools, we have divided our shop into a number of collections like specialized tools, instruments and tool kits. Scuba Clinic will not be held liable for any injuries, deaths or damages resulting from unauthorised or misuse of our products. Scuba Tools is a provider of dive maintenance tools and scuba test equipment. The unit comes in a protective box. $278. The tool features a 1/2" square drive and can be used with a 1/2" drive torque wrench, 1/2" drive swivel handle A collection of o-ring picks. 00 USD Save $31. Made out of aluminium 7075 makes the tool durable and lightweight at the same time. It fits a wide variety of dip tubes with sizes 6 mm, 1/4", 6. Our “turnkey” kits have been designed with dive centres and professional scuba repair centres in mind. About Us Located in Chalong, Phuket, Thailand, Scuba Clinic is modern and fully-equipped workshop dedicated to the manufacturing of specialised scuba service tools. Regulator and parts are not included. This version of inline adjustment tool is fitted with a dual drive: one side contains a slotted drive and the other side contains a 5 mm hex drive. Online store for standard and specialised scuba equipment service tools. Made from chrome-plated steel. A collection of standard hand tools commonly required in scuba service and repair such as allen keys, screwdrivers, nutdrivers and pliers. This tool provides a stable platform for the first stage to be held on a bench on clamped into a vise. Our store stocks a variety of the most commonly used scuba service tools. Selection of standard and specialised spanners used on the regulator bench. Orders valued under 800 USD will remain tax-exempted. Please note that the picture is for demonstration purpose only and do not reflect an actual product. Special Tools for Aqualung® Regulators Specialised tools for Aqualung regulators. Ensure that the holes on the cover ring are properly aligned with the pins of the tool prior to installing or removing the cover ring. The tool features a 1/2" square drive and can be used with a 1/2" drive torque wrench, 1/2" drive swivel handle This yoke nut tool allows the easy removal and installation of yoke nuts (19mm, 26mm and 1"). Features: Larger-LCD display for easy r This heavy-duty first stage holder is made from stainless steel 304, incorporating both LP (3/8 UNF) and HP (7/16 UNF) threads at each end. With the back nut removed, screw the tool onto the threaded section of the valve body till the valve body and base separate. Anodized blue finish. This tool is used to remove and install the Scubapro Air2 cover ring (generation 4, 5). Made from Aluminium with vibratory tumbled This BCD tool is designed to fit the over-pressure relief or dump valve of Scubapro BCDs, featuring 2 sides which work on both old and new-style of Scubapro dump valves. Never miss a dive again! This kit contains the essential speciality tools to perform service works on Atomic Aquatics first and second stages. The wrench has both open and close-ended sides that make this wrench suitable for the Apeks MTX-R heat exchangers. The tools is suitable for cylinder valves of brands such as Thermo, XS Scuba and possibly others. Our selection features some generic as brand specific tools to assist the technician. This kit contains the essential speciality tools to perform service works on Apeks first and second stages (XTX, AT, ATX, TEK3, BLACK PEARL, FSR, TUNGSTEN) and BCD's. Not only does it provide a good fit for both the plastic (part # 11. 3 mm, 3. This torque wrench is extremely suitable for regulator service work. 01 increments. The kit contains the following 6 tools : SCT-0523 3/16" Allen key, Extra Long SCT-0780 Plug Tool for Scubapro Second Stages SCT-1787 Inflator Stem O-Ring Installation Bullet for Scubapro Air2 3rd - 4th Specialised tools for Mares regulators. It also fits over the elbow dump assembly of the inflator. How to gear up for servicing regulators? Choosing the tools or kit (s) that are right for you Posted by Pia Limpiyasrisakul on Nov 16, 2018 22 mm Socket 3/8" Drive$9. This i The kit contains the following 7 tools : SCT-1789 Cover Tool for Scubapro Air2 SCT-1766 Poppet Assembly Assist Tool for Scubapro Air2 5th Gen SCT-1767 Inflator Stem O-Ring Installtion Bullet for Air2 5th Gen This light-weight aluminium splined wrench is designed to fit Scubapro low pressure hoses and most models of jam nuts on second stage regulators. Aqualung original spare parts. 106 and # 11. Find quality standard and specialised tools for scuba repair and service works at affordable prices. This combination will create a versatile powerhouse in testing ca Specialised tools for Apeks regulators. Easy installation of the o-rings is now possible without damaging the o-rings on the threads. Regulators are not included. 3 mm, 2. This adaptor allows the technician to easily adjust the orifice of Aqualung Airsource 3. A collection of tools commonly used in scuba scervice work. This kit contains: SCT-1101 St This kit contains the essential service tools required to perform service works on regulators and BCD's of any brand. Machined from Acetal. Specialized tools for Scubapro regulators. The tool securely clamps around the dip tube by using the knob to tighten it without damaging the part. It will assist the technician to set up effortlessly the 2nd stage inhalation effort. In-line adjustment tool is sold separately. Made from Acetal with stain This adapter allows the technician to easily adjust the orifice of Oceanic second stages equipped with a swivel hose - such as on the Oceanic Delta 4 second stage - using the SCT-0808 Balanced In-Line Adjustment Tool. The angled mirror provides visibility in inaccessible area such as the bottom side of the threads. Made of Acetal. 654" - grey The tools are made of anodized Aluminium 6061 and can be used with a 3/8" ratchet or torque wrench This basic version of an unbalanced inline adjustment tool is designed to work with slotted orifice type second stages. This model can be used in conjunction with the hose protector installation to As an alternative to our 4-in-1 Powerline Inflator Tool, this heavy duty version valve core tool serves the essential function of installing and removing the valve core of Powerline Inflator. Visit our online store and pick your pro-built scuba tools out of a wide range of products, ranging from specialized scuba technician tools to standard hand tools that should be present in every dive technician shop. Any technician will need some instrumentation and adjustment tools to check and set-up the overhauled regulator set. Economy preset adjustable torque wrench with a working range of 5-60 Nm. This gauge measures Gauge/Differential Pressure from –55 H2O to 55 H2O with 0. orph nlzwoja fhw deegugb myouwvx fuxsof xqofz kwz ptglt igdpg